On 06 Mar 09 at group /sci/electronics/repair in article
(Dav.p.) wrote:

Saludos Wolfgang
what 'Saludos ' ? Is not spanish ng..

Yes, but I'm living now in Paraguay.

i think there are other screws, have you left away the base?
If you are so sure of not, use a plastic strong thin thing to
sparate parts and lift it , if not you end with a slightly damaged
(bumps?) surface, the hooks are strong right, so you have to lift a
bit strong. lifted one only side and the game is done, i opened a
samsung 17" there was 3 hooks, one really near top, one 3/4 up center
the other 3/4 down. Remeber the hooks will be on the front i think, so
you better insist to press to the center the rear cover. bye from
Italy..

I got it open 2 days ago. 4 screw from the fram, 4 screws from the
standoff removed, monitor layed down on the face on a blanket.

The hooks 3 @ each side, 4 @ top and bottom are very strong and couldn't
be bent inside. But they are no sharp edges, just rounded. So with an
8cm width 0.5mm thick palette-knife, I could make enough tension, that
the side hooks slipped out, then top and bottom and more tension, I
lifted the back.

Saludos Wolfgang
--
Meine 7 Sinne:
Unsinn, Schwachsinn, Blödsinn, Wahnsinn, Stumpfsinn, Irrsinn, Lötzinn.
Wolfgang Allinger Paraguay reply Adresse gesetzt !
ca. 15h00..21h00 MEZ SKYPE:wolfgang.allinger