On Feb 18, 7:45 pm, Tim Wescott wrote:
Of late when I need a cutter I rough it out of an appropriate HSS blank
with a Makita hand grinder, then finish it on a bench grinder.

--http://www.wescottdesign.com

A good bench grinder is what I use. There are a lot of underpowered
bench grinders out there, and
I suspect that is what you have. You should not be able to stall a
bench grinder. And with a coarse and fine wheel, you should be able to
grind a tool bit about as fast on it as using a angle grinder. Faster
if you count the time to get the angle grinder and the time to put it
away.

The wheels that come with most grinders are not great. But if you buy
a coarse wheel that is about as coarse as the wheel on the angle
grinder, it will cut quickly.


Dan