Angle grinder lost flat wrench tool. How to unlock?
On Sun, 15 Feb 2009 19:09:52 -0600, Steve Barker
wrote:
lbbss wrote:
I have a 4" angle grinder that came with a 1/8" open end wrench to
unlock the cutting disk. The regular open end wrench is too thick
(1/4") to fit to my angle grinder. Any ideas what other tool I could
use to unlock it? Any ideas? thanks.
take the grinder and grind the wrench down to fit.
And then tape the wrench to the power cord.
|