lbbss wrote:
I have a 4" angle grinder that came with a 1/8" open end wrench to
unlock the cutting disk. The regular open end wrench is too thick
(1/4") to fit to my angle grinder. Any ideas what other tool I could
use to unlock it? Any ideas? thanks.

Tappet wrench. If that doesn't work, grind it down on your bench
grinder. (I would say an angle grinder would work in a pinch, BUT...)

nate

--
replace "roosters" with "cox" to reply.
http://members.cox.net/njnagel