Intalling HE3 washer on pedestal
AE Todd wrote:
I have an HE3 washer to install on a pedestal. This is what I plan to
do...
1. Intall shipping rods on back of washer.
2. Lay the washer on its back.
3. Remove the 4 feet.
4. Put the pedestal in place and install the 4 screws that hold the
washer to the pedestal.
5. Intall the 4 feet onto the pedestal.
6. Return the machine to upright position.
7. Remove shipping rods, move washer into place and test.
Do I have this right? Is there anything I am missing here? Are there
any pads or anything that get installed between the washer and the
pedestal?
Sounds like you've covered all the bases. I'm assuming the flopping around a
washer sometimes does with an unbalanced load won't shake the pedestal
apart.
Is this a home-made pedestal? If so, maybe a simple barricade or lips around
the edge to keep the washer from falling into the mosh pit during the more
excitable times...
|