View Single Post
  #2   Report Post  
Posted to alt.home.repair
Bill[_9_] Bill[_9_] is offline
external usenet poster
 
Posts: 627
Default Mild rant: 3-way lamp sockets are junk

Many manufacturers make "consumer grade" products (cheap junk), but also
make "commercial grade", "industrial grade", "hospital grade", or "military
specification" products which high quality and are built to last. They also
can cost 5 times more! These products would not be sold at a consumer retail
store.

I know Leviton makes these other grade products with plugs and outlets
(excellent quality), but I don't know if a 3-way light socket would be a
commercial/hospital/military product or just a consumer product?

Might want to call them and ask if they have a higher grade product you can
order... 877-389-0000

Web site...
http://www.levitonproducts.com/help/...66C&p id=1208



"Phil Again" wrote in message
Recently replaced the light bulb socket on a lamp and the socket has
started to go bad only after 6 months. Any one know of a Web source of
high quality lamp parts?

I was suckered in again by Leviton electric products. Leviton brand is
just cheap, cheap, cheap! Useless junk that don't last. Only thing
worse (very cheaply made and don't last) than Leviton's lamp products is
Leviton's eclectic wall duplex outlets, you know the 49 cent junk.

As you know, inside the socket there is the center contact, a spring leaf
second contact, and the outer shell for the neutral (white wire)
electrical connection. What normally happens is the 2nd connector looses
its spring over time and makes a weak connection with the 3-way light
bulb; corrosion results. (but everyone knows this already.)

But Leviton's products start to fail almost before I get my tools back in
the tool box in the basement. Everywhere I go, BORG, Hardware, Lamp
store, they all *only* carry the same cheaply made Leviton. I seem to
remember a 20 years ago, another brand of 3-way lamp sockets that were a
bit more expensive but lasted a lot longer since the maker used better
metal (spring leaf had more "spring" life.)

Again, anyone know of a Web source for a good quality lamp parts so a 3-
way lamp socket will last more than a couple of years? I found a few
hits from Google, but as I don't know them as vendors, I would like a
recommendation as to vendor and product maker.

Thanks to all who reply.

Phil