View Single Post
  #8   Report Post  
Posted to uk.d-i-y
[email protected] meow2222@care2.com is offline
external usenet poster
 
Posts: 9,560
Default differing light output between Halogen bulbs

Adam Aglionby wrote:
On 1 Feb, 14:33, wrote:
The Night Tripper wrote:
Hi All
* * * * I recently fitted a pair of new light fittings - ceiling things with
3x G9 halogen bulbs in each fitting. Each bulb has an opal glass surround.
The fittings were supplied with (frosted) 40W halogen G9 bulbs.


I'd guesstimated that the resultant brightness would be greater than that of
the old fittings they replaced, but was a little disappointed with the
result. However one of the bulbs as supplied was faulty, so I bought a
replacement pack; 2x 40W clear G9 from B&Q (yes, I know, but it was a
Friday night...).


The 'B&Q' bulb (mfd. by GE) was significantly brighter than those supplied,
to the extent that I bought a couple more packs and replaced the lot. I'm
now happy with the resultant brightness.


But I'm wondering; is the increased brightness because the GE bulbs are
clear, and the originals were frosted, or is it because the originals are
cheapo no-name ones made in China and with a possibly dubious wattage or
efficiency? I'm interested to learn if there's such a difference...


* * * * Cheers
* * * * j^n


Neither. The brighter bulbs will have shorter lives.
Explained hehttp://www.wiki.diyfaq.org.uk/index.php?title=Lamp_Life

NT


Short life high intensity halogen lamps are more usually found in
things like projectors and aircraft landing lights, lifetimes of 25
hours or less are not uncommon.

In less specialised markets lifespan, MTBF, of 2 500 hours is common,
these will be considerably more efficient than a non halogen incan and
longer life lamps typically 4Khrs, lower colour temp typically, still
a deal more efficient than non halogen incan.

Some low cost Asian lamps are OK, got to watch out for line voltage
230V lamps destined for euro market that really don`t like our mainly
240V + mains.

A lot are not very good at all, there are reasons why the big 3 lamp
makers, stay the big 3, Philips, GE and Osram and its not all to do
with sharp marketing.

Good quality branded lamps can be worth the extra, theres quite a lot
of development has gone into that hot wire in a bottle.

With exposed halogen capsules in current vogue in multi lamp ceiling
fittings , quality branded lamps are certainly worth the premium for
output and safety .

As Mr Elmer Fridrich says halogen still is "the most beautiful light
quality of anything on the market"

http://blog.cleveland.com/business/2...entor_el..html

Adam


halogens typically last 1500 hrs to 4500 hrs, the latter are
inevitably much dimmer. I doubt the OP would be putting 25 hr lamps
into domestic light fittings - though who knows.


NT