Update on welding with implanted defibrillator
Don Foreman wrote:
The
key spec is probably 60Hz B field at 1 gauss (0.1 millitesla).
Finally, something I can get some traction with.
What I would worry about is the fast rise time stuff from the arc
getting into the defib sense wires and having the induced noise
interpreted by the processor as the erratic spikes of a heart in
trouble. A 60 Hz sine wave is probably tolerable.
I used to use a lot of this stuff when I was chasing EMI fields:
http://www.chomerics.com//products/documents/emicat/pg190shieldwrap.pdf
If you want to try it in your test setup, send your address and I will
send out a couple of feet.
Kevin Gallimore
|