"J. Clarke" wrote in message
...
theedudenator wrote:
I will be adding a tee and run into my gas lines.
I was planning on a pressure test and soap test.
I have a gauge that I used for co2 I guess this will also work? It
is from 0-60psi
You should be using a gage that reads to around 5 psi and is readable
in units of 1/10 psi.
Here's one description of the procedure
http://books.google.com/books?id=9Gp...sult#PPA116,M1.
My gas inspector required a 15 psi test.