theedudenator wrote:
I will be adding a tee and run into my gas lines.
I was planning on a pressure test and soap test.

I have a gauge that I used for co2 I guess this will also work? It
is from 0-60psi

You should be using a gage that reads to around 5 psi and is readable
in units of 1/10 psi.

Here's one description of the procedure
http://books.google.com/books?id=9Gp...sult#PPA116,M1.
Check your local codes to be sure of the correct requirements for your
area.

Note--gas valves are intended for low pressures--if you run the
pressure up too high they may leak even though there's nothing wrong
with them.

--
--
--John
to email, dial "usenet" and validate
(was jclarke at eye bee em dot net)