Hi,

Working on a Samsung 50" Plasma TV that have been mounted too hard to
the wall, so the backplate have pushed the Y-MAIN board and made a
short.

One MOSFET have touched ground, maybe the GATE,
four N MOSFET IXTK62N25 have been changed to similar MOSFET type.
And a FUSE on the Y-MAIN board have been changed(Near the Vs power
connector)
Now there is picture buts is pink, and very bad..

When just turned on its looks like this:
http://s205.photobucket.com/albums/b...t=P1030400.jpg


After few secs its gets pink, you can see MENU etc badly
http://s205.photobucket.com/albums/b...t=P1030401.jpg

The black area goes away after some minutes.


What can be wrong?

The button locaten on the board in the middle, have been pussed, have
it reset something?
also there is some DIP switches EXT, INT etc - right now on EXT.

Model: Samsung HP-P5071
S50HW-XD03
50"HD D3.0 Y-MAIN

Some manuals he
http://www.cci.uncc.edu/coit_new/tec...EDC%20D62B.pdf

Someone have a scheme over the Y-MAIN board?