I have a 6 X 10 X 4 inch deep box behind the blade on my RAS. it sits
just beside and to the rear of the column. It sucks with only a 2"
hose. I also collect sawdust from the output on the blade guard. Works
pretty well, but the hose on the blade guard gets in the way now and
then.

Pete Stanaitis
------------------------

wrote:

I recently purchased a Craftsman RAS and a hd shop vac.
After hooking up the vac hose to the exhaust port on the RAS I was
quite disappointed to see all the sawdust flying out the front of the
blade.
Any ideas on how to contain the dust using the vac?