Thread: Good Gas Can?
View Single Post
  #5   Report Post  
Posted to rec.crafts.metalworking
NokNokMan NokNokMan is offline
external usenet poster
 
Posts: 11
Default Good Gas Can?

I have a Blitz Jerry Can with a metal spout. Had it for years. The spout
is removable and I found an O-ring that fits around it nicely. The can cap
itself has a wide flat rubber gasket that won't leak at all. Theres a small
hole above where the spout screws in which does a fair job of venting the
can. Can't complain; it's served me well.
Maybe this:
http://www.amazon.com/Blitz-12040-Me.../dp/B00004X14F


"Doug White" wrote in message
...
My wife has made it clear that although she doesn't mind operating the
snowblower when I'm at work, she HATES the 1 gallon plastic gas can I
have. Frankly, I can't blame her, 'cause it seems to be built by the
folks that invented the dribble glass.

The one I have is by Wedco, and you have to take the nozzle off, and
remove and then re-install a plug to seal it every time you use it. When
you remove the plug and lock the spout back on with the plastic nut, it
never seals well unless you REALLY crank on it. End result is gas
leaking all over & a ticked off spouse. It has no gasket to seal the
spout to the can or the cap. The plug has a thin O-ring, and I've never
been convinced it actually sealed against anything either.

I'd much prefer a can with a cap on the nozzle so that you dont have to
go through hoops every time you use it. If it filled through a second
opening, that might be even better.

So, do the very knowledgeable folks here have a favorite type/brand of
can? It may be that Wedco has improved their design by now, because they
still seem to be one of the big brands. Consumer Reports thinks their
"no-spill" design was better than ones from Blitz, which seems to be
another top brand. There also see s to be some funny business about what
state certain cans are legal for. I live in Massacuhusetts, which is
probably not a good thing...

Thanks for any suggestions.

Doug White