On Mon, 08 Dec 2008 14:59:56 -0600, Ignoramus25884
wrote:

With my 7 year old, I was trying to do a simple experiment, which is
extraction of oxygen and hydrogen from water by means of electrolysis.

To that end, we used magnesium sulfate (epsom salt) as electrolyte,
insulated copper wire with bare ends for electrodes, and a DC power
supply for electricity.

We collected hydrogen and oxygen into separate test tubes.

The part that did not work is that only one of the electrodes produced
any gas at all, and there was no gas coming out of the second
electrode. After a while of this, one test tube filled with gas and
the experiment stopped as the water was displaced from that
electrode.

So, my question is how come there is no gas on the second electrode.

I do not understand why this is so, given that both the experiment
book as well as Wikipedia says that magnesium should not oxidize?

The water acquired bluish tint.

WTF?

This probably isn't going to work well for you if you don't use
platinum as an electrode. You were getting hydrogen off of the
cathode, but the anode was reacting with the oxygen as soon as it was
produced, so you never saw it. (Obviously, you'd only gotten half as
much as the hydrogen, anyway.)

Maybe these guys can help.....
http://www.carolina.com/product/phys...Matches&page=1
--

Forté Agent 5.00 Build 1163

"When a work lifts your spirits and inspires bold and
noble thoughts in you, do not look for any other standard
to judge by: the work is good, the product of a master
craftsman." - Jean de la Bruyere (1645-1696)

Homepage
http://pamandgene.tranquilrefuge.net...shop/index.htm
-----------------
www.Newsgroup-Binaries.com - *Completion*Retention*Speed*
Access your favorite newsgroups from home or on the road
-----------------