Loading the output of A or B with a resistive load (1.0K) makes not a whit
of difference.

Jim

--
"It is the mark of an educated mind to be able to entertain a thought
without accepting it."
--Aristotle


"BobW" wrote in message
...

"RST Engineering (jw)" wrote in message
...
Circuit in question is the diff amp current to voltage U2 upper right
hand corner.

Jim


Is the meter connected to the U101A or U101B?

If it's connected to U101B, try moving it to U101A to see if it helps
pulling the output closer to your minus supply when the load current is
zero.

Bob
--
== All google group posts are automatically deleted due to spam ==