MLD wrote:
wrote in message
...
On Tue, 25 Nov 2008 11:02:21 -0500, "MLD" wrote:


wrote in message
...
On Mon, 24 Nov 2008 09:44:32 -0800 (PST), "gnu/linux"
wrote:

On Nov 24, 9:28 am, DerbyDad03 wrote:
Here's another reason to perform regular maintenance on your
furnace even if it's running fine...

My 3 YO furnace seemed to be cycling on and off when it first
fired up, so I suspected a dirty flame sensor. When I opened the
panel I found water (and a little rust) under the drip collector
for the vent pipe. When I pulled the vent pipe out and looked
down into the collector, I found that it was cracked along the
back wall. When the exhuast blower came on, water would leak out
the back and drip onto the "shelf".

I know this wasn't the cause of my initial problem but I
wouldn't have found it if I hadn't been looking for something
else. It was just a reminder that even when things seem to be going
OK, we should be inspecting our appliances on a regular basis -
just in case.

Thanks !

Another reason NOT to own a "high deficiency" furnace!!!!

I suppose you still use a horse and buggy. Why get into those new
fangled 4-wheel gas machines that require more than hay and a visit
from the Vet every now and then.
MLD
No, but I chose to purchace a good MID efficiency furnace instead of
the condensing version on advice from several furnace dealers in the
area. Even at todays gas prices, the savings from a GOOD non
condensing furnace to the condensing model will hardly pay for the
earlier required repair/replacement of the condensing furnace.

I went with 2 stage burner, DC fan and 2 speed eductor fan.

Several neighbours and my brother bought high efficiency condensing
furnaces within the last 10 years and have replaced them already due
to required repairs being more expensive than replacement (and in 2
cases after having spent over $1000 on repairs already)

All were (different) brand name furnaces.

There is not as much of a difference between the two types of
furnaces as you might think. i have a condensing furnace and it's
been running just fine for the past two years. Who knows how
everything will turn out but for now but if there is a problem I'm
pretty well covered for all key components (electronic and hardware)
via the Gas Company Service plan. Too bad those that spent over
$1000 didn't have a service contract. MLD

With 10 year parts and lifetime heat exchanger warranties I don't understand
why the $1,000 repair. Show me the money?

--
Zyp