"jim" wrote in message
...
I am about to add 2 outside wall lights. From inside the house it It
will not be obvious if it has been forgotten to switch off either.
Thus am looking for suitable double switch (preferably standard white)
with a worry factor built in such as a neon reminder.

Nearest I can find is two separate square switches with neon, (double
pole type intended for flex outlets) which would have to be mounted
side by side on a dual backing box.

Not very neat & switch rating is OTT. Any better suggestions would be
appreciated.

TIA


A simple neon indicator lamp could be connected in series with the lamps.
Something as simple as this item from Maplin
http://www.maplin.co.uk/Module.aspx?...t1 5#features
would allow internal indication that the lights are on.

The one shown can be fitted to a standard light switch by drilling a hole
above or below the internal switch gear. You would need a deeper back box
to allow the indicator to fit inside, but it is easier than buying two
separate Double Pole Switches for something as standard as a couple of
outside light fittings.

Shop around on the web to find out if you can find smaller versions of the
indicator lamp, but make sure you check that they are rated for mains
voltages (220 - 240 Vac).

Ideally the indicator would be connected to the switched live side of the
switches and a neutral, but it can also be connected across the switch live
feeds on a single pole system and it will still glow when either light is
switched on.