In article ,
DaveM wrote:
Sounds like the OP has neglected to set his TV to the channel that the
DVD/VCR is set to. That channel is usually 3 or 4. Look at the rear
of the unit and see if there is a switch to select channel 3 or 4. Set
your TV to that channel. The output channel might be set in the menu.
Go to the DCD/VCR setup menu and look for a setting that allows you to
select which channel the DVD/VCR outputs the signal on. Set the TV to
that channel.
But he said it replays ok?
--
*Re-elect nobody
Dave Plowman
London SW
To e-mail, change noise into sound.