View Single Post
  #26   Report Post  
Posted to alt.home.repair
DerbyDad03[_2_] DerbyDad03[_2_] is offline
external usenet poster
 
Posts: 193
Default Why the wide prong on a plug?

Gary H wrote:
On Mon, 27 Oct 2008 13:51:10 -0400, "EXT"
wrote:

[snip]

While this is true, it also true that manufacturers need to make products as
stupid proof as possible. The cost of the plug is minimal, and really causes
no inconvenience to the users, as you will get it right 50% of the time
without even looking.


But it'll seem more like 10% because of selective memory.

Don't sweat over such minor stuff,


when there is some
serious stuff out there you really need to worry about.


No worrying, but a bit of arithmetic:

Can you turn a plug around in 2 seconds? That's an average of 1
second, since you have to turn it around half the time.

Now, how many times do you plug things in? It it's just 10 times a
day, that's 36524 times a year (based on average 365.24 days per
year). That's over 10 hours a year.

About 3 DAYS (and I mean REAL DAYS, 24 hours each) of your life wasted
because of the unnecessary use of polarized plugs! Is that so minor
now?


Let's try my math:

It takes me less than a minute grab the bottle of White-Out and put a
white dot on a black plug - or a magic marker if the plug is white.

Since all the receptacles in my house are installed the same way, all
the plugs go in the same way - "dot up".

BTW - do you really plug things in 10 times a day on average? And that's
just 2 pronged "things". I could go days without plugging a single 2
pronged device in. It would take an awful lot of "make up" plug-ins to
average 10 if you miss a day or two here and there.