Thread
:
Arcade game monitor problem
View Single Post
#
6
Posted to sci.electronics.repair
Franc Zabkar
external usenet poster
Posts: 1,569
Arcade game monitor problem
On Fri, 24 Oct 2008 08:33:20 -0600,
(Ken G.) put
finger to keyboard and composed:
Thanks Franc .. I dont know which conection is B+ on this . It seems to
be a Wells Gardner monitor according to a website provided i an arcade
newsgroup .
I would think that one end of the primary winding would be connected
to the collector of the switching transistor, the other to the B+.
If the FBT has any part numbers, try locating a substitute he
http://www.hrdiemen.es/products/inde...anguage=eng-GB
The HR substitute will have a wiring diagram with voltages.
I notice that the Wells Gardner Quadrascan colour monitor at the Atari
link provided by Dean uses a HV regulator circuit that senses a 180V
pulse from a tap on the primary winding and uses this feedback to vary
the B+ to the FBT, and thereby control the EHT.
- Franc Zabkar
--
Please remove one 'i' from my address when replying by email.
Reply With Quote
Franc Zabkar
View Public Profile
Find all posts by Franc Zabkar