View Single Post
  #19   Report Post  
Andy Hall
 
Posts: n/a
Default IMM, Andy, Nat Philiso, John, etc, some more advice please

On Wed, 8 Oct 2003 22:29:56 +0100, "IMM" wrote:


"Andy Hall" wrote in message
.. .
On Wed, 8 Oct 2003 10:16:02 +0100, "IMM" wrote:


"Andy Hall" wrote in message
.. .



Check out the flows that you want for the showers (personally I
wouldn't accept less than 15 litres/min each) plus the bath and you
may be in trouble with a combi - even a large one.

The Screwfix Pressure Balance Shower Valve is rated at 7 litres/min, and
that is mixed water, so drawing less from the combi than 7 litres/min.

Most
showers are around this. This makes a 13 litre/min combi adequate for

two
simultaneous showers.


It would do if you think that 7 litres/min for one was good enough.
I don't. This is not much better than a crappy electric job.


There is a big difference between 4 litres/min and 7 litres/min. I'm sure
this mixer can take more than 7 litres/min though.


There's a big difference between 50p and a pound as well, but neither
will buy a large G&T........ :-)









---


..andy

To email, substitute .nospam with .gl