View Single Post
  #9   Report Post  
Posted to alt.home.repair
ransley ransley is offline
external usenet poster
 
Posts: 4,926
Default Fireplace not drawing properly

On Oct 14, 8:58*pm, "cm" wrote:
We have a two sided fireplace in our house. The house is 18 years old and
the fireplace is original to the house. We purchased the house about a year
ago. We tried several times last winter to have a fire and most of the time
smoke backed up in the house. We have tried having a window partially/fully
open and warming the chimney prior to lighting the logs, with no luck.

I measured the chimney height tonight and it is taller than it needs to be.
I was told it needs to be 2' taller than the point where it is 10' away from
the roof. There is a large rooftop A/C unit 7' feet away from the chimney
that is 2' taller than the chimney. Should I raise the chimney above the A/C
unit? What else should I look for?

Thanks,

cm


I have to open a nearly window to get no smoke, some newer houses with
tyvek and windows that seal tight can have issues. Raise chimney with
stove pipe to see if it helps. Maybe its a poor design and a lip is
needed to lower hood, raise fire or close down doors.