circular saw question
probably a corragated fastener. Put on the carbide blade and saw away.
s
"DJ Redlocks" wrote in message . ..
I just had carpeting installed in a rental property and purchased a circular saw to cut 1/4" - 3/8" off the bottom of the doors. I had no problem with the first four doors, however a 36" wood door appears to have some metal in it. About
1 1/4" into the cut sparks started to fly so I stopped. I also noticed a piece of metal about 1/2" wide on the bottom of
the door an inch or two from the end of the cut. Any advice
would be appreciated.
John
|