andrew,


I will try a y-cable

the other option i was thinking about ; car hifi high= low converter

would that have been an option ???



nitro2



"Andrew Erickson" schreef in bericht
...
In article ,
"nitro2" wrote:

I have a question about " line out " output .....................

This little unit has a front " line-out " , and a " l/r line out " on
the
back.

The back connectores are used to connect the control-part to the
amplifier-part of this mini set ( thus connecting the 2 units together ,
the
amplifier is mounted in the second unit ) .

What i would like to have ( wishes ) is a second set of line-out
connectors
to give this little unit the possibility to use it with a second-set of
powered speakers.

Probably the easiest thing to do would be to get a set of Y cables and
connect them to the back line output and the two inputs you need to
drive. Connecting one line-level output to two inputs is not a problem
at all. (Connecting two outputs to one input is a poor idea, on the
other hand.)

--
Andrew Erickson

"He is no fool who gives what he cannot keep to gain that which he cannot
lose." -- Jim Elliot