VR-407 unbalanced supplies
On Sun, 28 Sep 2008 19:40:35 -0500, Steve put finger to
keyboard and composed:
What you
said about the center tap makes sense, that would explain everything,
but it measures fine, .9 ohms between either winding & center, 1.8
total.
Could it be that the transformer's centre tap pin has a dry solder
joint that closes up when you probe it? I always reflow the solder at
coils and transformers for this reason.
- Franc Zabkar
--
Please remove one 'i' from my address when replying by email.
|