Nate Nagel wrote:
RBM wrote:
"Nate Nagel" wrote in message
...
George wrote:
Nate Nagel wrote:
RBM wrote:
"Nate Nagel" wrote in message
...
Thank you! that looks like that might help a bit. I'll have to
check and see if I can pick one of those up locally, if not,
thanks for the link.
Additionally, I was just looking at the links I posted in my last
post.
http://www.p4c.philips.com/files/s/s...17_pss_aen.pdf
http://www.p4c.philips.com/files/s/s...17_pss_aen.pdf
It looks like the pic of the cable with the assembled connectors
has some kind of plastic seal at the back of the connector.
Neither the connectors that came with the installation tool or
the ones that I bought separately (which appear to be exactly the
same) have this seal. Did I buy the wrong connectors?
thanks
nate
dicko wrote:
There is a tool that makes it real easy to slide on the
connectors it
sort of expands the shield and separates it from the center
insulator.
I use one and have no problems. It also helps, if after
stripping the
coax, if there is any braid sticking out, to bend it back over the
outer insulation before putting the connector on.
http://www.techtoolsupply.com/index....ROD&ProdID=214
-dickm
On Sat, 06 Sep 2008 15:57:20 -0400, Nate Nagel
wrote:
Hi,
since it's not possible to work outside today (thanks Hanna!) I
gathered up all the cable stuff I'd gathered in preparation to
install a cable outlet in the living room. Before I got
started I wanted to make sure that I'd be able to terminate the
cable. Well, I can't - I'm missing some sort of trick I
guess. I'm using Philips RG-6 quad shield, Philips
weatherproof connectors (I bought those because I suspect that
I will be running cable outside eventually) and the stripper
that came with a cheap regular cable tool set. I can strip the
cables OK but I can't seem to push the connectors onto the
cable at all. I have tried both the Philips connectors and the
generic connectors that came with the cheap tool set. It's
like the little round tubular bit in the connector just won't
slide under the braid in the cable. Any suggestions? IS there
another tool that grips the cable and can force the connector on?
thanks
nate
The connectors in the links are compression type. It sounds like
you have crimp type
actually the connectors in the links and the connectors I bought
have the same part number. I didn't realize until you pointed it
out that the picture of the connector was different than what I
have. Maybe they've improved the design? I dunno. I bought all
this stuff at Lowe's as the real supply house only keeps normal
business hours, don't know how quick it turns over there.
nate
Is this the tool you bought:
http://www.consumer.philips.com/cons...ol+SDW5061O-17
It seems to be the "digital compression tool" they refer to on the
connector description.
It is indeed. It only sets the connector though, it doesn't grip the
cable at all.
nate
Once you use the stripping tool and peal back the shielding, you
should be able to slip the fitting down the cable until the core wire
is sticking through the front. Then you insert the fitting with cable
attached into the tool and compress the butt end into the fitting. I'm
wondering if your stripping tool isn't working properly
It appears to be and I unsderstand what you're saying, but the
f-connector won't slide more than 1/8" or so onto the cable. I think I
do need that "flaring tool" that someone else posted but I can't tell
whether HD or Lowe's sell it so I may not be able to get back to this
for a couple weeks unless I find myself with some free time during the
day some day to go to the real supply house.
nate
All right, I am so frustrated I could just spit...
Ordered a "flaring tool" online as I was unable to find one locally. It
doesn't help at all... I can't get it between the dielectric and the
braid of this cable at all. In fact, when I attempt to force it, it
just pushes the dielectric down into the cable assembly so if I've
stripped, say, 1/4" of the center wire and then another 1/4" off the
jacket, I end up with 1/2" of the center wire sticking out and I still
can't insert the connector. Could someone who has done this before
PLEASE post exact mfgrs. part numbers of a cable, connector,
installation tool, and flaring tool (if required) with which they have
successfully been able to install connectors on the end of an RG-6U quad
shield cable. Where to purchase would also be very helpful. I've been
tripping over this run of cable going up the basement stairs for almost
two years now and I STILL have not found anything that will allow me to
properly cut and terminate cable so that I can run it within the walls.
Thanks...
nate
--
replace "roosters" with "cox" to reply.
http://members.cox.net/njnagel