On Sep 24, 11:58*am, Poster wrote:
On Tue, 23 Sep 2008 19:24:22 GMT, (Anna Kettle) wrote:
On Tue, 23 Sep 2008 19:27:53 +0100, Poster wrote:

Just make sure you use sand and cement. You may not know about
Accrington Brick ..it has very tight joins

Which I suppose is why mastic was suggested because it will be easier
to get into the crack between the bricks

You should use sand/cement mortar or better still sand/hydraulic lime
mortar which is probably what was used originally. The pointing of a
brick wall is a sacrificial layer and should be weaker than the brick
(sounds easy in this case) and more porous than the brick (which
mastic isnt) to give a route for water to find its way out

Water will find a way out one way or another and it has done it by
blowing the mastic

Anna

Thanks Anna, I will follow your advice.

(Enjoyed your website BTW)

Don- Hide quoted text -

- Show quoted text -

Four parts building sand.
One sharp sand.
One lime.
One cement.
Cant go wrong with that mix for re-pointing.