On Thu, 18 Sep 2008 22:15:27 +0300, "Joe"
wrote:

To clarify the circuit, the postive side of the speaker receives 17 volts
thru one diode and a resistor and the negative side is connected via
transistor to ground and the transistor is driven by 4001 IC.

What value resitor?
What's the part number on the speaker?

I just happen to have the manual for a similar Heathkit GC-1005
"Electronic Clock" handy. No specs on the speaker (401-163). The
circuit is similar in that the speaker has one lead going to the
collector of an MPS-A20 and the other to 18.5VAC (not DC) through a
diode and 1200 uf to ground for a DC voltage of 25.7VDC. No resistor
in series.

So, let's do the math. My guess(tm) is that 1 watt will be
sufficiently loud to wake the dead. Yours has about a 15VDC swing.
Assuming a 50% duty cycle and a pure sine wave (yeah sure):
Power = E^2 / R
1 watt = 15^2 / R
R = 225 ohms.
So, it's probably a high impedance speaker of some sorts. I have the
digital clock and an LRC meter and could probably measure the
impedance. If you can't get the info any other way, bug me and I'll
rip it apart.


--
Jeff Liebermann
150 Felker St #D http://www.LearnByDestroying.com
Santa Cruz CA 95060 http://802.11junk.com
Skype: JeffLiebermann AE6KS 831-336-2558