trvlnmny wrote:

I have been asked to do a repair on a piece of furniture. A piece of
1" pine measuring 6" x 18" has fallen off. the piece was assembled
using a nail gun with 6 nails at each end. These things protrude about
1" on the back side of the piece. Unlike nails which I could hammer
out these are to small and just bend.
Does anyone have a good idea on how to remove these easily?
Thanks for any and all help.

Easiest depending upon the size of the head, is to pull them through with a
pair of pilers, pine will pull straight through fairly easy.

--
Froz...