View Single Post
  #37   Report Post  
Posted to uk.d-i-y
[email protected] boltmail@mailbolt.com is offline
external usenet poster
 
Posts: 166
Default Floorboards - nail or screw?

On 8 Sep, 14:50, "Dave Plowman (News)" wrote:
In article
,
* wrote:

My take would be to nail them - sometimes nails are better than
screws, and this is one of them. *You can pry up nailed floorboards
much faster than unscrewing all the screws you would use.


And they often split. Especially if nailed with cut nails.

--
*Gravity is a myth, the earth sucks *

* * Dave Plowman * * * * * * * * London SW
* * * * * * * * * To e-mail, change noise into sound.


I don't think I've ever split a board which hasn't already had a split
in it - and I've relaid the floors in most of the rooms in my house,
which is Victorian, i.e. nailed with rusty old cut brads which have
been there for over a century. As long as you ease the end of the
board up with care to start with, once you have got it up enough to
get a pry bar under both edges, they either pop out, or pop through.

With 100+ year old screws, you'd be looking at a new floor.