"Igor" wrote in message
...
On Mon, 25 Aug 2003 05:39:13 GMT, "Baisleys" wrote:


"Fats" wrote in message
. com...
Hi...just wondering if anyone knows of a good plan for a wine rack?
Thanks!!

Hi Fats:

I have created a simple, inexpenseive and expandable wine rack system.
It's
note wood, but . . .

Materials needed:
4" rigid drain line (white outside/black inside) ~$4.00/10ft length
11 small (~4-6") cable ties / 10ft of drain line
(1 section of drail line is enough material for 11 slots in the wine
rack)

Tools Needed:
Saw (I used a chop saw, but a hand saw and/or sharp utility knife
would
also work)
Utility knife
Drill Motor & 1/4" drill bit

[snip]

What kind of rigid drain pipe are you talking about? I have never seen
white outside/black inside. And cut it with a utility knife? Not the PVC
I have seen. And, why not just glue the pipes together? And, are you
using 12" chop saw?

The Drian pipe is not the solid PVC. It is sort-of corrigated and comes in
2 versions. One with holes drilled ~ 6" apart, one without the doles.

As far as the cutting, a box cutter would work, but I used a 10" chop saw
and did a little rotating action to complete the cut. I also used the
utility knife to clean up some of the rough edges.

One could glue the pieves together, but this way it was more modular.

I hope that helps.

Cheers!