View Single Post
  #15   Report Post  
Posted to alt.home.repair
Wayne Boatwright[_3_] Wayne Boatwright[_3_] is offline
external usenet poster
 
Posts: 95
Default Backyard "Platform"

On Fri 29 Aug 2008 07:33:35p, Toffee Monday told us...


"Wayne Boatwright" wrote in message
5.250...
Our relatively new yard is in transition and we currently have no patio
or
deck. I would like to assemble something semi-permanent that would be
easy
to do, as well as easy to disassemble when we upgrade to an outdoor
"room".

My idea was to use 2"x6"x12' pressure treated lumber laid flat at
intervals
directly on the ground and anchor them to the soil with either rebar or
stakes to prevent movement. These boards would be leveled and with a
slight pitch for any water runoff. Then construct the platform floor
across these boards also using 2"x6"x12' pressure-treated boards,
attaching
them with either galvanized or stainless steel screws.

We live in the desert, so there's no concern about ground movement due
to winter heaving or damage from excessive moisture.

This would give us a 12' x 12' platform roughly 4" above the ground,
where
we would place our grill and umbrella table and chairs.

Does this sound feasible?


Wayne,

It certainly sounds like a waste of energy! By your replies to other
posters, you appear to be looking for support on your idea, and not
really open to other ideas.

However, I will tell you what I would do. And, being you formally lived
in Ohio, what many in Ohio do.

Either have the concrete placed now....... OR
Construct a permanent deck. Build it level, with no pitch. Say for
instance, your proposed room would be a 10x12. I would build the deck as
a 16x 20 (just an example). Positioning the deck, so it would be offset,
not centered to the proposed room. This would leave me a deck on 2 sides
of my room, after the room was built. It would be enough room to set
your grill, a couple of chairs etc, on the outside of the room. Treated
CDX Ply or similar could be used for the inside of the room once the
room is built, or the layout could call for the CDX to be installed to
room size, then the room built on it. Your initial layout would be
critical so you don't build your deck to high initially.

Those aluminum/glass rooms can be built to any size. Either way, wood or
concrete base, I would definitely have a much larger base for my grill
etc. Otherwise, it certainly will look silly with a grill sitting in the
sand.


This is the best alternative I've heard yet, and I'm open to it if I can
afford it. The configuration is actually one I had already thought of for
the future room. Someone else would probably hve to executde it, though,
as I don't have all the equipment it might need.

For several reasons, though, I don't know if I could handle the work
myself, due to age and heath issues. I could envision the relative
simplicity of my original idea, with all boards precut and just screwed
together.

Still, it's worth looking into having someone put the initial deck up and
get estimates for it.

Thanks for your ideas...



--
Wayne Boatwright

*******************************************
Date: Friday, 08(VIII)/29(XXIX)/08(MMVIII)
*******************************************
Countdown till Labor Day
2dys 3hrs 49mins
*******************************************
We are everywhere.
*******************************************