"Samuel M. Goldwasser" wrote in message
...
I may need a single 22V10-10 or -15 programmed. I thought my PAL
programmer
was working but the burnt PAL behaves strangely in a way that suggests
it may have internal incorrect logic. It also doesn't pass the
programmer's
test wiht respect to the test vectors (but I'm not sure that this ever
really worked properly).

I'll pay for the PAL or send a raw one and the .JED file to anyone who
might volunteer.

Or, if someone has a working programmer they'd like to sell.....

Thanks!

Go to JDR microdevices. They sell that kind of ****.
http://www.jdr.com/ or 1-800-538-5000


--
sam | Sci.Electronics.Repair FAQ: http://www.repairfaq.org/
Repair | Main Table of Contents: http://www.repairfaq.org/REPAIR/
+Lasers | Sam's Laser FAQ: http://www.repairfaq.org/sam/lasersam.htm
| Mirror Sites: http://www.repairfaq.org/REPAIR/F_mirror.html

Important: Anything sent to the email address in the message header above
is
ignored unless my full name AND either lasers or electronics is included
in the
subject line. Or, you can contact me via the Feedback Form in the FAQs.