Tablesaw popped fuse/breaker
"Lew Hodgett" wrote in message
news:RFook.863$7N1.332@trnddc06...
"Eigenvector" wrote:
I was cutting some 16/4 poplar on the tablesaw and got halfway through it
when the saw stopped dead.
At first I thought the blade had simply stopped but then I realized the
motor was completely off. Breaker on the tablesaw has popped.
The old "Trying to get 8# in a 5# bag" routine.
Going to take at least 3 passes with a slow feed rate to get thru that
stock.
Lew
Well sometimes you have to make do.
Wrong tool for the job, don't have to tell me.
|