"Mike" wrote in message
...
I am installing 3/4 inch oak hardwood in a hallway 20 ft long and 4 1/2 ft
wide. I am installing it the "long way" on a 5/8 inch plywood subfloor. My
problem is that the 12 inch floor joists change directions so that the
hardwood will be parallel with the joists for the last 7 feet of the
hallway. The joists are on 16 inch centers and I thought about going under
the floor and installing blocks between the joists, but the central heat
ductwork is in the way. The only way I can put blocks in is to cut into the
subfloor and pull enough of it up to put the blocks in from the top. I
would also have to attach blocks to the existing joists to have something
to nail to when replacing the subfloor. Is this all necessary, or can I
just lay the hardwood on the floor the way it is for that short distance.
Thanks for the help.

it will probably look silly if you switch in mid-hallway. if it were me, i'd
either switch to doing it all cross wise, or lay it diagonally, so it would
be the same the entire length.