On Jul 29, 1:46*am, wrote:
This winter I installed a 16-circuit subpanel and rewired the second
floor. *The sub is fed from the main via a 60A 250v circuit over 6/3.
Everything has been working fine ever since, but I haven't really been
pulling much on these circuits until this week.

Today I'm noticing that when one of my window A/C's compressor kicks
on it is flicking the lights. *But these lights are on a different
circuit (same panel). *I did not expect this. *The A/C is pulling
about 10A (120v) on a 20A dedicated circuit. *Other power being drawn
from this panel includes:

-computer: ~5A on a dedicated 20A circuit
-computer and extras: ~5A on a dedicated circuit
-another A/C: ~8A on a dedicated circuit
-lights: ~? (1A maybe) on another circuit

So total I doubt I'm drawing more than 30A of 120V, so I can't be
maxing out the feed, right? *That feed should give me 96A of 120V (80%
of 60A at 240V).

So what's the deal? *Why would any lights on a different circuit
flicker when the compressor kicks on on another circuit? *To be fair,
the flicker is subtle. *It's not huge, but it's there.

thanks

Duuuh , im pulllin to much , why am I pullun, my dick is small I need
a a whore or a diksuker, but I say get a HO or a lady sooo,