On Jul 6, 8:31 pm, "JD" wrote:
Hey folks.

I've a cousin who has to use a cane to get around and he is the kind of
person you just like to help. I have been considering making a cane for him,
but I am limited by my lathe. If I make him a cane, it will need to be a 2
piece cane. I've considered using something like is used to put a 2 piece
que stick together. The problem I've run into is I can't find a source for
this.

For anyone out there who has made a cane or walking stick, how did you
manage it and do you have a supplier for some means of screwing the 2 pieces
together? I've some nice pieces of walnut and maple selected for making his
new cane and I'm anxious to get it done. Any help would be appreciated.

I use a cane and make them also. I have had the best luck attaching
the head to the stick with using one inch wood dowels and a turned
head for the top part. To attach them I use a one inch wood threading
tool I bought from Harbor Freight eons ago. Actually the only reason I
thread them is because I have a 3-1/2 inch lock back knife blade that
I insert in the end of the cane. With just two or three threads I have
a cane that is secure and in less than a few seconds can be taken
apart and used for various purposes. If you go this route make sure
you check all local laws where you would be carrying the cane.
Airports, Federal buildings etc. might give you problems.

GL2