On 16 Jul 2008 04:24:23 GMT, "DoN. Nichols"
wrote:

And at least you have a larger bore than I did. Beware that you
will probably need to make a left-hand thread ACME, not just a normal
ACME if your cross-slide is like mine. Check it out before you order
anything.

Good Luck,
DoN.
If he's making nut and screw, he COULD use a RH thread - the
cross-slide would just work backwards and take a bit of getting used
to (and the scale would read backwards)
** Posted from http://www.teranews.com **