On 2008-07-14, Jim Wilkins wrote:
On Jul 14, 11:36*am, Ignoramus22312 ignoramus22...@NOSPAM.
22312.invalid wrote:
Now that I have my lathe "working", I started looking at its condition
a little more closely. On my lathe, the cross slide is moved by a
3/4-5 ACME screw, that moves a brass nut attached to the cross slide.

There is a lot of wear in this, as in, maybe 1/16 to 1/8" of slop.

I was thinking about fixing this.

Three things come to mind.

1) Buy a McMaster ACME brass nut 95270A123 and attach it to a custom
made part to fit under the cross slide.

2) Do something clever like wax the screw and inject epoxy into the
nut to take up the slop.

3) Make a replacement part on the mill and lathe.

Has anyone dealt with this issue. Clausing wants $750 (not a typo) to
custom make this part for me.

i deal with it by ignoring it. There's no climb-milling issue on a
lathe. Look into Moglice

What about facing?
--
Due to extreme spam originating from Google Groups, and their inattention
to spammers, I and many others block all articles originating
from Google Groups. If you want your postings to be seen by
more readers you will need to find a different means of
posting on Usenet.
http://improve-usenet.org/