I would transport the lathe in my trailer. It is 13x36, about 1,500
lbs. The lathe will be on cart, which I could raise and put on blocks
so that the wheels are not engaged.

The question is how to tie the lathe down. The tailstock end, I think,
is straightforward as I would put the tiedown to pull the tailstock.

The headstock is where I have a question. Can I use a ratchet tiedown
to pull on the headstock (around the corner between bed and headstock,
specifically) or would the headstock be damaged by that pulling action?

--
Due to extreme spam originating from Google Groups, and their inattention
to spammers, I and many others block all articles originating
from Google Groups. If you want your postings to be seen by
more readers you will need to find a different means of
posting on Usenet.
http://improve-usenet.org/