Hi,

[Background of this job is appended to end of post for the terminally
bored/curious]

I'd be really grateful for a pointer or two regarding some ali double glazed
windows, as seen he http://www.dionic.net/Windows/

I've got two blown 35x36" panels which should be straightforward to replace,
once I know the magic approach for getting them out.

I found this info via google:
http://www.diynot.com/forums/viewtopic.php?t=27217

which says: "Remove rubber beading from inside with a blunt tool, then push
glass unit back a bit from the front then unclip the plastic angle beading
on the front."

I've got ali (rather than plastic) angle at the front, and a rubber bead
that does come out on the inside. Is it likely that the procedure to remove
the panel is the same? Am I aiming to unclip the angle by lifting or by
pushing back first?

I'm being cautious before I take tools to it as I really don't want to break
anything, and it's probably going to be stiff due to corrosion.

On a side note, anyone know a good place to buy replacement sealing bead in
various section-styles? I couldn't find much beyond greenhouse stuff.

Many many thanks,

Tim

Background, skip unless you're really really bored...
================================================== ===

I have aquired a house (aquired, not bought) and it looks like the beginning
of a moderately comprehensive renovation job. Assuming I can't sell it
(seems unlikely at the current time), I'll be aiming to fix it up to a good
standard for my family to move in to. The emphasis will be on doing it a
good standard with a long life expectency, not a bodge-and-sell renovation.

There will be a few jobs that may get contracted out to a professional,
probably anything roofing related for a start, but the general aim is to do
most of it myself.

I can turn my hand to most things, given enough preparation and information,
but having rented for mumble years, I'm out of practise. So I'd be most
grateful for various bits of advice. I'm OK with electrics (subject to
swotting up on the 17th and testing procedures), plumbing (bit dated),
tiling and painting/papering (except upside down).

I'm fairly clueless (but not potentially useless, I hope!) on matters of
ventilation, structural integrity and damp proofing. More on that later.
The house is a solid dry shell with a functional roof that needs a full
internal refit.

As there's a lot to do, despite previous ramblings on the subject of overly
beaurocratic building regs, I will put in a BNA to cover everything, as
there's not much point in not doing so (some of the work has structural
implications, exact scope undecided at this stage). With any luck I'll get
to pick the BCO's brains along the way.

By way of contribution, I want to keep a photo-blog of the project,
including mistakes (sure there'll be a few), which will be publically
available in case it can help anyone else starting out on a renovation
project.