On Jun 14, 3:31*pm, "bent" wrote:
I bought an Aqua Coastal Champion 56-frame pool pump from Interpools.com
here in Toronto for a 16x32' in ground pool. *It is made by
Waterwayplastics.com in Oxnard, CA. *It is 1.0 h.p self priming and says it
has 115/230 option although on the boxes sticker "110AC" is written in a
couple places. *I write all this because I am a duffus. *The wiring I have
going to the pool pump has a black wire, a white wire, and a green (or
ground) wire, coming from an electrrician installed (probly req'd by
Canadadian code) CFCI throw attached to the main fuse box running
underground inside.

This pump has two ways to wire it inside the cover plate which they call
"Low Voltage" or "High Voltage". *There are only two internal connectors,
plus a third for ground. *For Low it is one way for High it is the reverse.
They are labelled "White" and "Brown". *Which way do I wire it? *Is this
enough information? *The store so far: nada.

----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet News==----http://www.newsfeeds.comThe #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----

Crikey: If you have to ask this sort of question and by own admission
is a "duffus" then don't go at it!
Especially for a pool installation where a fault could be a fatal.
Get an electrician who really knows what they are doing and will
ensure proper grounding and GFCI operation.
Also there are aspects of legal and insurance liability.
Stores probably hope they are selling something that is 'plug and
play'; but there can always be technical circumstances not noticed by
the unitiated that make something not safe.
Safest in my opinion would be TO NEVER HAVE ANYTHING TO DO WITH THE
POOL PLUGGED IN WHILE POOL IS IN USE!
But someone could always forget!!!!!