HP CRT filament question
On Tue, 27 May 2008 08:33:21 -0700 (PDT), dodger741
put finger to keyboard and composed:
I have an HP 8568B spectrum analyzer which went through shipping
recently. The display unit no longer works and it appears that the
CRT section is the culprit. I checked the HV and signals and on the
surface they appear OK. I did find some glass chips in the case
which leads me to believe the tube is damaged/broken. Taking the CRT
out is a pain. I can measure the filament resistance at about 4 ohms.
If the tube is cracked or broken, wouldn't the filament burn-up with
an infinite resistance??
If air has entered the tube, then you will hear arcing noises and the
HV will probably shut down.
- Franc Zabkar
--
Please remove one 'i' from my address when replying by email.
|