Hi William,

Thanks for the great suggestion, I would be happy to do that but you
have just exceeded my knowledge of electrics and electronics. grin In
anticipation of a reply like this, yesterday I measured the following.

The motor has 3 wires going inside the body, Red, White and Brown.

Red - White is 2 Ohms
Red - Brown is 6 Ohms
White - Brown is 7 Ohms

If I apply power to two wires and kick start the motor by hand after
about 3 seconds I get a steady, no load current draw of

Red - White 7 Amps
Red - Brown 3.2 Amps
White - Brown 13 Amps.

I am guessing at 7A the Red - White are 115v the running pair. So now
where do I put the momentary switch?

Thanks for all the help so far.

Dave