"hogheavenfarm" wrote in message
...
I looked at the "beam-over" pics, good idea, but I was concerned
about the bottom chord of the rafter overlap, looked like only 4-6",
should be more.
What you cannot see in the picture is that the angle iron brackets are
thru-bolted to both sets of ceiling joists, on both sides of the beam.
Others have correctly pointed out, that the posts must
rest on solid bases, all the way down.
Here's another shot of the new space minus the old wall. The end
support for the beam in this case consisted of four 2X4s, three ganged side
by side in the outside wall cavity and one sistered on the interior side
perpendicular which you can see in the pic.
http://www.pbase.com/speedracer/image/2622654
Dave in Houston