Of course, the assistant would req a dirt floor in the shop...
JR
Dweller in the cellar

On Sun, 06 Apr 2008 12:00:52 -0400, Spehro Pefhany
wrote:

On page 10 of the manual for this little (but heavy) Grizzly G0619
mini-mill:

http://grizzly.com/images/manuals/g0619_m.pdf


Items Needed for Setup

The following items are needed to complete the
setup process, but are not included with your
machine:

Description Qty
. Precision Level ........................................... 1
. Safety Glasses (for each person) .............. 1
. Solvent .................................................. ..... 1
. Shop Rags .................................................. 1
. Metal Shim Stock ....................................... 1
. Brass Hammer ........................................... 1
. Power Drill (optional) .................................. 1
. Drill Bit 9.16" (optional) ................................. 1
. Hex Bolts M12-1.75 (length as needed) .... 4
. Flat Washers 12mm ................................... 8
. Lock Washers 12mm ................................. 4
. Hex Nuts M12-1.75 .................................... 4
. An Assistant ............................................... 1

In the old days, the final item would have been included in the crate,
supplied with a few bowls of rice for the trans-Pacific journey and
would emerge ready to help with the setup. 8-(



Best regards,
Spehro Pefhany
--------------------------------------------------------------
Home Page: http://www.seanet.com/~jasonrnorth
If you're not the lead dog, the view never changes
Doubt yourself, and the real world will eat you alive
The world doesn't revolve around you, it revolves around me
No skeletons in the closet; just decomposing corpses
--------------------------------------------------------------
Dependence is Vulnerability:
--------------------------------------------------------------
"Open the Pod Bay Doors please, Hal"
"I'm sorry, Dave, I'm afraid I can't do that.."