On Apr 6, 9:00 am, Spehro Pefhany
wrote:
On page 10 of the manual for this little (but heavy) Grizzly G0619
mini-mill:
http://grizzly.com/images/manuals/g0619_m.pdf
Items Needed for Setup
The following items are needed to complete the
setup process, but are not included with your
machine:
Description Qty
. Precision Level ........................................... 1
. Safety Glasses (for each person) .............. 1
. Solvent .................................................. ..... 1
. Shop Rags .................................................. 1
. Metal Shim Stock ....................................... 1
. Brass Hammer ........................................... 1
. Power Drill (optional) .................................. 1
. Drill Bit 9.16" (optional) ................................. 1
. Hex Bolts M12-1.75 (length as needed) .... 4
. Flat Washers 12mm ................................... 8
. Lock Washers 12mm ................................. 4
. Hex Nuts M12-1.75 .................................... 4
. An Assistant ............................................... 1
In the old days, the final item would have been included in the crate,
supplied with a few bowls of rice for the trans-Pacific journey and
would emerge ready to help with the setup. 8-(
Best regards,
Spehro Pefhany
--
"it's the network..." "The Journey is the reward"
Info for manufacturers:http://www.trexon.com
Embedded software/hardware/analog Info for designers: http://www.speff.com
Probably part of their "continuous improvement" program!
Paul