None wrote:
On 24 Mar, 15:54, Peter Parry wrote:
On Sun, 23 Mar 2008 20:15:26 -0700 (PDT), None
wrote:
Any suggestions?
What temperature is the tank thermostat set to?
We dont have a thermostat, just a bath/sink option. The bath option
heats more water than the sink one obviously. It can get very hot, I
just don't know how hot. The cylinder has only been installed two
years.
I take it this is heated by an electric immersion heater then? If so you
can find the temperature on the immersion stat - this is often under a
disc on the top of the heater. You normally need to remove a small screw
to take the disc off and reveal the stat. Make sure it is set to 65 deg
C or hotter to make sure you kill anything unwanted.
--
Cheers,
John.
/================================================== ===============\
| Internode Ltd -
http://www.internode.co.uk |
|-----------------------------------------------------------------|
| John Rumm - john(at)internode(dot)co(dot)uk |
\================================================= ================/