Remove Deadbolt
On Sat, 22 Mar 2008 11:49:49 -0500, Bob Simon
wrote:
I have a Merit deadbolt on my front door that I want to remove. This
lock has a bolt that rotates 90 degrees up to latch.
First I took off the cover plate then removed two big screws that hold
the latch assembly to the door. I see nothing else to unscrew and
nothing on either the inside or outside cylinder to remove.
What do I do next?
Never mind.
After doing a little reading, I learned this is a mortise lock. I
found the set screws and was able to remove a cylinder.
This lock has always been difficult to operate. I squirted some Slick
50 in the mechanism and now it works great.
|