"C & E" wrote in message
...
I have a Stanley, French door with an Arrow (?!) lockset and deadbolt.
The
deadbolt (DB) is loose and the bezel will turn but not tighten. On the
interior side of the DB are two steel pins which are below the level of
the
brass colored bezel. I tried prying the interior side bezel as well as
turning but nothing has changed. Are any of you familiar with this
construction and how to correct it? The last time this happened I called
a
locksmith who repaired it while I was away. It can't be that hard but I'm
lost. As always, TIA!
Chuck



If it is the Arrow I am thinking of, the inside rose has a disk that turns
when you turn the inside key and when you turn the key the screw holes will
be exposed. A #1 Phillips can then be inserted in the holes to snug up the
screws.

--
Roger Shoaf
If you are not part of the solution, you are not dissolved in the solvent.